Subversion Repositories computer_asset_manager_v1

<?php

   /*

    * dmidecode2array.php

    * 

    * Set of routines which convert the output of dmidecode into an array containing key/value pairs.

    *

    * Use this by including the file in your script, load the output of a dmidecode run into an array of lines, then call

    * $array = dmidecode2array( $contentsOfFile ).

    * Sample code to read a file name from ARGV, process the file and dump the resulting array using print_r shown at

    * bottom of this file, commented out.

    * 

    * Copyright (c) 2020 by the Daily Data, Inc. All rights reserved. Redistribution and use in source and binary forms, with or

    * without modification, are permitted provided that the following conditions are met:

    *     Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

    *     Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following

    *        disclaimer in the documentation and/or other materials provided with the distribution.

    *     Neither the name of the nor the names of its contributors may be used to endorse or promote products derived from this

    *       software without specific prior written permission.

    *

    * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

    * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

    * SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

    * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

    * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

    * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

    *

    * 20200113 rodo@dailydata.net v0.1

    * Initial build

    * 

    */

   /*

    * Trims a value, then compares it to several 'null' possibilities

    * if it is a null, returns empty string, otherwise returns value

    */

   function cleanUpDMIValue( $value ) {

      $value = trim( $value );

      switch (strtolower( $value )) {

         case 'unknown':

         case 'unspecified' :

         case 'not available':

         case 'to be filled by o.e.m.':

         case 'not specified': return '';

      }

      return $value;

   }

   /*

    * Read value from array of hash, return array of "$outputKey\tvalue" for each entry found

    * If nothing found, returns empty array

    * if $unique is true, returns first non-empty value found

    * if $outputKey is not defined, uses $key

    */

   function getDMIInformation( $data, $type, $key, $outputKey = '', $unique = true ) {

      $return = array();

      foreach ( $data[$type] as $handle ) {

         if ( isset( $handle[$key]) ) {

            $a = cleanUpDMIValue( $handle[$key] );

            if ( $a ) {

               $return[] = ( $outputKey ? $outputKey : $key ) . "\t" . $a;

               if ( $unique ) {

                  return $return;

               }

            }

         }

      }

      return $return;

   }

   /*

    * adds $value to array

    * if $value is scalar, simply adds it

    * if $value is array, adds every row

    * returns modified array

    *

    * Can be done more efficiently with some PHP built-ins, but I forgot how.

    */

   function mergeArrays( $array, $value ) {

      if ( $value ) {

         switch (gettype( $value ) ) {

            case 'array' : foreach ( $value as $thisVal ) {

                              $array[] = $thisVal;

                           }

                           break;

            case 'boolean' :

            case 'integer' :

            case 'double'  :

            case 'string'  : $array[] = $value;

         } // switch

      }

      return $array;

   } //mergeArrays

   /*

    * Function will take an array of lines representing the output of a dmidecode file

    * and pick and choose the values we want to put into CAMP attributes.

    * It will return an array of key/value pairs to be added into the attributes table

    *

    * NOTE: this is a summary of values we decided to store. dmidecode files have a lot of

    * additional information we chose not to include, but they can be added by simply modifying the 

    * 

    */

   function dmidecode2array( $contents ) {

   // allows us to group the dmi types by function. not implemented

   $dmiGroups = array(

         "bios" => "0,13",

         "system" => "1,12,15,23,32",

         "baseboard" => "2,10,41",

         "chassis" => "3",

         "processor" => "4",

         "memory" => "5,6,16,17",

         "cache" => "7",

         "connector" => "8",

         "slot" => "9"

   );

   // This contains the standard DMI types, ie no OEM stuff. For reference, not used in code

   $standardDMITypes = array( 

         "0" => "BIOS",

         "1" => "System",

         "2" => "Baseboard",

         "3" => "Chassis",

         "4" => "Processor",

         "5" => "Memory Controller",

         "6" => "Memory Module",

         "7" => "Cache",

         "8" => "Port Connector",

         "9" => "System Slots",

         "10" => "On Board Devices",

         "11" => "OEM Strings",

         "12" => "System Configuration Options",

         "13" => "BIOS Language",

         "14" => "Group Associations",

         "15" => "System Event Log",

         "16" => "Physical Memory Array",

         "17" => "Memory Device",

         "18" => "32-bit Memory Error",

         "19" => "Memory Array Mapped Address",

         "20" => "Memory Device Mapped Address",

         "21" => "Built-in Pointing Device",

         "22" => "Portable Battery",

         "23" => "System Reset",

         "24" => "Hardware Security",

         "25" => "System Power Controls",

         "26" => "Voltage Probe",

         "27" => "Cooling Device",

         "28" => "Temperature Probe",

         "29" => "Electrical Current Probe",

         "30" => "Out-of-band Remote Access",

         "31" => "Boot Integrity Services",

         "32" => "System Boot",

         "33" => "64-bit Memory Error",

         "34" => "Management Device",

         "35" => "Management Device Component",

         "36" => "Management Device Threshold Data",

         "37" => "Memory Channel",

         "38" => "IPMI Device",

         "39" => "Power Supply",

         "40" => "Additional Information",

         "41" => "Onboard Devices Extended Information",

         "42" => "Management Controller Host Interface"

   );

      // verify this is something we can work with, First line should be the version of dmidecode found

      if ( preg_match('/dmidecode ([0-9.]+)/', $contents[0], $results) ) {

         $dmidecodeVersion = $results[1];

      } else {

         return "Not a valid dmidecode file";

      }

      // first, let's parse it into a hash

      $currentHandle = '';

      $currentType;

      $data = array();

      for ( $i = 0; $i < count($contents); $i++ ) {

         if ( preg_match('/^Handle ([0-9a-zx]+).*DMI type[^0-9]*(\d+),/i', $contents[$i], $outputArray) ) {

            //print "matched\n"; print_r($outputArray); die;

            $currentType = $outputArray[2];

            $currentHandle = $outputArray[1];

            if ( isset( $standardDMITypes[$currentType] ) || array_key_exists( $currentType,$standardDMITypes ) ) {

               $name = $contents[$i+1];

               $data[$currentType][$currentHandle]['name'] = $name;

               $i += 2; // skip the line with the name, and go to the next line

            } else {

               $currentType = $currentHandle = '';

            }

         }

         if ( $currentHandle &&  preg_match('/^\s+(.*):\s+(.*)$/i', $contents[$i], $outputArray) ) {

            $data[$currentType][$currentHandle][$outputArray[1]] = $outputArray[2];

         }

      }

      # well, we have at least one entry, so let's go

      $return = array();

      /*

       * Grab the information we want from the file. Note tht we are renaming some of the fields from the dmidecode output

       * to match the keyfields used by our system (4th parameter in getDMIInformation).

       *

       * First, we'll get the easy stuff; stuff which only has one value we care about.

       * 

       */

      // manufacturer info

      $return = mergeArrays( $return, getDMIInformation( $data, '1','Manufacturer' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '1','Product Name', 'Model' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '1','Serial Number' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '1','UUID' ) );

      // physical machine

      $return = mergeArrays( $return, getDMIInformation( $data, '3','Type', 'Enclosure Type' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '3','Asset Tag', 'Enclosure Asset Tag' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '3','Height', 'Enclosure Height' ) );

      // firmware version

      $return = mergeArrays( $return, getDMIInformation( $data, '0','Vendor', 'Firmware Vendor' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '0','Release Date', 'Firmware Release' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '0','Version', 'Firmware Version' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '0','Firmware Revision', 'Firmware Revision' ) );

      // processor information. NOTE: assumes all sockets populated and all processors the same. If this is not the case

      // we will need to modify the following to dump each individual socket, similar to the meory information below.

      if ( isset( $data['4'] ) ) // count the number of sockets

         $return[] = "CPU Count\t" . count( $data['4'] );

      $return = mergeArrays( $return, getDMIInformation( $data, '4','Family', 'CPU Family' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '4','Manufacturer', 'CPU Manufacturer' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '4','Version', 'CPU Version' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '4','Current Speed', 'CPU Speed' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '4','Core Count', 'CPU Cores (ea)' ) );

      $return = mergeArrays( $return, getDMIInformation( $data, '4','Thread Count', 'CPU Threads (ea)' ) );

      /*

       * memory information. We want details on each slot for this, so we have to go through each entry, one at a time.

       * For readability, we also want to take several values and turn them into one human

       * readable string for each socket. So, we go through each entry in the memory socket, determine if it is populated

       * then concat it together for a pretty output

       */

      if ( isset( $data['17'] ) ) {

         $return[] = "Memory Slots\t" . count( $data['17'] );

         $totalRAM = 0; // we'll accumulate the total size as we find slots populated

         foreach ( $data['17'] as $entry ) { // type 17 has one entry for every DIMM slot

            $mem = array(); // fill this up with the values we want to turn into a string, then we'll implode it into the string

            $mem[] = trim($entry['Locator'] ? $entry['Locator'] : ($entry['Bank Locator'] ? $entry['Bank Locator'] : '' ));

            if ( $entry['Size'] == 'No Module Installed' ) {

               $mem[] = 'Unpopulated';

            } else {

               $mem[] = trim($entry['Size']); // size can be kilo, meg, gig, tera, so convert it to mega

               if ( preg_match('/(\d+)\s+(GB|MB|TB|kb)/i', $entry['Size'] , $outputArray) ) {

                  switch ( strtolower( $outputArray[2] ) ) {

                     case 'gb' :

                              $outputArray[1] *= 1024;

                              break;

                     case 'tb' : 

                              $outputArray[1] *= 1024 * 1024;

                              break;

                     case 'kb' : 

                              $outputArray[1] /= 1024;

                              break;

                  }

                  $totalRAM += $outputArray[1];

               }

               $mem[] = trim($entry['Form Factor']);

               $mem[] = trim($entry['Type']);

               $mem[] = trim($entry['Data Width']);

               if ( isset( $entry['Configured Clock Speed']) && isset($entry['Speed']) && cleanUpDMIValue($entry['Configured Clock Speed']) && cleanUpDMIValue($entry['Speed']) )

                  $mem[] = cleanUpDMIValue($entry['Configured Clock Speed'] . '/' . cleanUpDMIValue($entry['Speed']) );

               if ( isset($entry['Manufacturer']) && cleanUpDMIValue($entry['Manufacturer']) )

                  $mem[] = cleanUpDMIValue($entry['Manufacturer']);

               if ( isset($entry['Part Number']) && cleanUpDMIValue( $entry['Part Number'] ) )

                  $mem[] = 'p/n ' . cleanUpDMIValue($entry['Part Number']);

               if ( isset($entry['Serial Number']) && trim($entry['Serial Number']) != 'Not Specified' )

                  $mem[] = 's/n ' . cleanUpDMIValue($entry['Serial Number']);

            }

            $return[] = "Memory\t" . implode( ', ', $mem );

         }

         $return[] = "Memory Total\t$totalRAM MB";

      }

      /*

       * power supplies. Most workstations will not even have an entry here, but for servers we will have details on each individual

       * power supply, including the part number, serial number, etc..., so like memory, we want a detailed listing with a human

       * readable string for each psu

       */

      if ( isset( $data['39'] ) ) {

         $return[] = "Power Supply Count\t" . count( $data['39'] );

         foreach ( $data['39'] as $entry ) {

            if ( preg_match('/^Present/i', $entry['Status'] ) ) {

               $psu = array();

               $psu[] = trim($entry['Name']);

               $psu[] = trim($entry['Max Power Capacity']);

               $psu[] = trim($entry['Manufacturer']);

               $psu[] = 'p/n ' . trim($entry['Model Part Number']);

               $psu[] = 's/n ' . trim($entry['Serial Number']);

               $return[] = "Power Supply\t" . implode( ', ', $psu );

            }

         }

      }

      return array( $return );

   }  // dmidecode2array

   /*

    * Test code for dmidecode input

    * call from cli as

    * php dmidecode2array FILENAME

    * the array will be dumped to STDOUT by print_r

    * 

    */

   /* remove this line for testing

   $filename = $argv[1]; // get first parameter from cli

   if ( $filename ) {

      // slurp file into array, ignore empty lines and remove line endings

      $contents = file( $filename, FILE_IGNORE_NEW_LINES | FILE_SKIP_EMPTY_LINES );

      // $out will contain the key/value pairs

      $out = dmidecode2array( $contents );

      // dump it

      print_r( $out );

   } else {

      print "You must pass the file as the first command line parameter\n";

   }

   remove this line for testing */

?>