Subversion Repositories sysadmin_scripts

#! /usr/bin/env perl

# Script does an snmp walk through the ports of one or more network

# switch, gathering MAC addresses assigned to each port.

# 

# It then does an snmp walk through the arp table of one or

# more routers to determine IP and DNS entries for the MAC address

# 

# Information gathered is stored in persistent storage (a yaml formatted file

# in the same directory), then reloaded at the next start of the program.

# As new entries become available, they are added. A time stamp

# records the last time an entry was "seen"

#

# requires snmp running on this machine. Also uses YAML::Tiny perl module

# under debian and derivatives, use the following command to install

# apt-get -y install snmp libyaml-tiny-perl

#

#

# Data is stored in the hash %switchports with the following structure

# %switchports =

#     {switch} (from $config{'switches'} key)

#        {name} (scalar, from snmp)

#        {location} (scalar, from snmp)

#        {'ports'} (constant key for sub hash)

#           {port number} (from snmp)

#              {connection} (uniqe id from snmp, basically the MAC)

#                 {mac} (from snmp walk of switch)

#                 {ip}  (from snmp walk of router)

#                 {hostname} (from reverse dns query)

#                 {lastseen} (last time this was active as unix timestamp)

#

# Uses two external files, both in the same directory as the script

# mapSwitches.config.yaml - Configuration file. See makeConfig.pl.sample for documentation. This can be created if  you, like

#                           me, are more comfortable with perl syntax. Once edited, run it to create the .yaml config file

# mapSwitches.yaml -        a state file which maintains information across executions. This allows us to track connections

#                           which are not on all the time. Can be deleted at any time for a fresh start. Can be dumped into a

#                           tab delimited text file (to STDOUT) with helper script mapSwitchesCSV.pl

#

# 20190407 RWR

# converted to use external config file in YAML format

# added the ability to ignore ports on the switches

# 20190514 RWR

# Added port aliases

# 20190526 RWR

# fixed mapSwitchCSV.pl to output in various delimited format (see README)

# 20200107 RWR v1.3

# Fixed problem where alias MIB was not returning values

# 20200228 RWR v1.4

# added description MIB and field

# 20200229 RWR v2.0.0

# rewrite, with 80% of the code changed. Found serious flaws with the way the ports were being read and fixed them.

# also set it up so it is a little more concise by combining redundant code into one routine, parseSNMPQuery, which

# reads an snmp walk and returns the results as a hash

# 20200301 RWR v2.1.0

# added some error checking in snmpwalk when a value is not returned, and also when the MAC address of the switch in

# question show up as bridge 0, which has no port (or, actually, all ports). Also, fixed the ignoreports

# 20200302 RWR v2.2.0

# Added the ability to override or supplement arp and dns searches for mac addresses

# 20230323 RWR v2.3.0

# Added ability to have one or more non_router files, with mac/name/ip in it in case arp lookup failed

# added script to create static html file in addition to csv

#

# 20230327 RWR v3.0.0

# rewrite to make things more efficient, and store data in different format. You MUST remove old yaml file

# before running this.

use strict;

use warnings;

use Data::Dumper; # only used for debugging

use Socket; # for reverse dns entries

use YAML::Tiny; # apt-get libyaml-tiny-perl under debian

use File::Spec; # find location of script so we can put storage in same directory

use File::Basename;

my $DEBUG = 0;

# define the version number

# see https://metacpan.org/pod/release/JPEACOCK/version-0.97/lib/version.pod

use version;

our $VERSION = version->declare("v3.3.0");

# see https://perldoc.perl.org/Getopt/Long.html

use Getopt::Long;

# allow -vvn (ie, --verbose --verbose --dryrun)

Getopt::Long::Configure ("bundling");

my %config; # we read the configuration file into this

# where the script is located

my $scriptDir = dirname( File::Spec->rel2abs( __FILE__ ) );

# put the statefile in there

my $STATEFILE = $scriptDir . '/mapSwitches.yaml';

my $CONFIGFILE = $scriptDir . '/mapSwitches.config.yaml';

my $SWITCHPORTMIB  = 'iso.3.6.1.2.1.2.2.1.8'; # returns port number and state, with a state of '1' meaning operational

my $SWITCHMACMIB   = 'iso.3.6.1.2.1.17.4.3.1.1'; # dot1dTpFdbAddress, aka mac addresses

my $SWITCHIFALIASMIB = 'iso.3.6.1.2.1.31.1.1.1.18'; # ifAlias, the the 'alias' field

my $SWITCHIFDESCMIB = 'iso.3.6.1.2.1.2.2.1.2'; # ifDescr, the "description" field

my $BRIDGEPORTSMIB = 'iso.3.6.1.2.1.17.4.3.1.2';

my $BRIDGE2PORTMIB = 'iso.3.6.1.2.1.17.1.4.1.2';

# this is only for the router, to get IP of the device in question

my $ROUTERIPMACMIB = 'iso.3.6.1.2.1.4.22.1.2'; # ipNetToMediaPhysAddress #'iso.3.6.1.2.1.3.1.1.2';

# this should work for all devices

my $DEVICENAMEMIB  = 'iso.3.6.1.2.1.1.5'; # sysname

my $DEVICELOCMIB   = 'iso.3.6.1.2.1.1.6'; # syslocation

# snmp returns a dotted integer for the mac, but we want mac's as hex with no formatting

# take a dotted integer form of a mac and converts it to hex, all lower case

sub makeMAC {

   my $string = shift;

   my @octets = split( '\.', $string );

   for ( my $i = 0; $i < @octets; $i++ ) {

      $octets[$i] = sprintf( "%02x", $octets[$i] );

   }

   return join( '', @octets );

}

# mac's from various places can have formatting, like ##:##:##:##:## or ###-###-###

# this will clean all that up by removing anything except hex values

# it will also convert alpha's (a-f) to lower case.

sub cleanMac {

   my $mac = shift;

   $mac =~ s/[^a-f0-9]//gi;

   return lc $mac;

}

# grabs one single SNMP value from string. Assumes $OID returns only one line, then runs $regex against it.

sub getOneSNMPValue {

   my ( $oid, $community, $ip, $regex ) = @_;

   my $line = `snmpwalk -v1 -c $community $ip $oid`;

   $line =~ m/$regex/i;

   return $1;

}

# runs an snmpwalk using $MIB, then for each line, splits it with a regex

# if order is set to 12, first value of regex is a key, else second value is the key

sub parseSNMPQuery {

   my ( $MIB, $ip, $community, $regex, $order ) = @_;

   $order = 12 unless $order;

   my $return = {};

   my $values = `snmpwalk -v1 -c $community $ip $MIB`;

   print "\t\t\tsnmpwalk -v1 -c $community $ip $MIB\n" if $DEBUG > 1;

   foreach my $line ( split( "\n", $values ) ) {

      next unless $line =~ m/$regex/;

      if ( $order == 12 ) {

         $return->{$1} = $2;

      } else {

         $return->{$2} = $1;

      }

   }

   return $return;

}

# Load configuration file, die if we could not find it

# config file is a single page YAML file

sub loadConfig {

   my $filename = shift;

   my %config;

   if ( -e $filename ) {

      my $yaml = YAML::Tiny->read( $filename );

      %config = %{ $yaml->[0] };

   } else {

      die "could not locate config file $filename\n";

   }

   return \%config;

}

# simple display if --help is passed

sub help {

   use File::Basename;

   print basename($0) . " $VERSION\n";

   print <<END

$0 [options]

Options:

   --no-snmp        - do not actually run snmp commands

   --debug          - set debug level

   --version        - display version and exit

   --help           - This page

END

}

# get information about one single switch

#

sub getSwitchInfo {

   my ( $ip, $community, $ignorePorts, $switchInfo ) = @_;

   print "Working on $ip with community $community\n" if $DEBUG;

   $switchInfo->{$ip}->{'name'} = # get actual device name

      &getOneSNMPValue( $DEVICENAMEMIB,

                        $community,

                        $ip, 

                        qr/= STRING: "?([^"]*)"?/);

   $switchInfo->{$ip}->{'location'} = # and its snmp location

      &getOneSNMPValue( 

         $DEVICELOCMIB,

         $community,

         $ip, 

         qr/= STRING: "?([^"]*)"?/ );

   # get list of ports into hash with state as the value, '1' is operational

   my $ports = &parseSNMPQuery( $SWITCHPORTMIB, $ip, $community, qr/$SWITCHPORTMIB\.(\d+)\s=\sINTEGER:\s+(\d+)/ );

   print "=========Ports Hash\n" . Dumper( $ports ) . "\n" if $DEBUG == 4;

   foreach my $port ( keys %$ports ) {

      next unless $ports->{$port} == 1; # skip any non functional

      next if $ignorePorts->{ $port };

      # Get information about the ports. This may be possible to skip except on rare occassions?

      # get port aliases, set to port number if undef

      $switchInfo->{$ip}->{'ports'}->{$port}->{'alias'} = 

         &getOneSNMPValue( 

            "$SWITCHIFALIASMIB.$port", 

            $community, 

            $ip, 

            qr/\.\d+\s+=\s+STRING:\s+"?([^"]*)"?$/ );

      $switchInfo->{$ip}->{'ports'}->{$port}->{'alias'} = $port unless defined ( $switchInfo->{$ip}->{'ports'}->{$port}->{'alias'} );

      # get the port Description, set to port number if undef

      $switchInfo->{$ip}->{'ports'}->{$port}->{'description'} = 

         &getOneSNMPValue( 

            "$SWITCHIFDESCMIB.$port", 

            $community, 

            $ip, 

            qr/\.\d+ = STRING: "?([^\"]*)"?$/ );

      $switchInfo->{$ip}->{'ports'}->{$port}->{'description'} = $port unless defined ( $switchInfo->{$ip}->{'ports'}->{$port}->{'description'} );

   }

}

# get all MAC addresses on switch and associate them with the correct port numbers

# https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/44800-mactoport44800.html

sub getSwitchPortMacs {

   my ( $ip, $community, $ignoreList, $macList ) = @_;

   print "\tFinding Mac Addresses\n" if $DEBUG > 1;

   # get the MAC addresses into a list

   my $macs = &parseSNMPQuery( $SWITCHMACMIB, $ip, $community, qr/$SWITCHMACMIB\.([0-9.]+)\s=\sHex-STRING:\s+([0-9a-z ]+)$/i );

   print "Macs\n" . Dumper( $macs ) if $DEBUG >= 3;

   # find which bridges they are on

   print "\t\tFinding what bridges the MAC's are on\n" if $DEBUG > 2;

   my $macBridges = &parseSNMPQuery( $BRIDGEPORTSMIB, $ip, $community, qr/$BRIDGEPORTSMIB\.([0-9.]+)\s=\sINTEGER:\s+(\d+)/ );

   print "MacBridges\n" . Dumper( $macBridges ) if $DEBUG >= 3;

   print "\t\tFinding what ports the ports are\n" if $DEBUG > 2;

   my $bridgeToPort = &parseSNMPQuery( $BRIDGE2PORTMIB, $ip, $community, qr/$BRIDGE2PORTMIB\.([0-9.]+)\s=\sINTEGER:\s+(\d+)/ );

   print "BridgeToPort\n" . Dumper( $bridgeToPort ) if $DEBUG > 3;

   # now, merge the three together to figure out what port a particular mac is on

   foreach my $mac ( keys %$macs ) {

      print "\t\t\t$mac\n" if $DEBUG > 3;

      next unless defined ( $macBridges->{$mac} ) and defined ($bridgeToPort->{$macBridges->{$mac}} );

      my $port = $bridgeToPort->{$macBridges->{$mac}};

      next if $ignoreList->{$port};

      $macList->{&makeMAC($mac)}->{'switch'} = $ip;

      $macList->{&makeMAC($mac)}->{'port'} = $port;

      $macList->{&makeMAC($mac)}->{'originalMAC'} = $mac;

      $macList->{&makeMAC($mac)}->{'lastseen'} = time();

   }

}

# get IP address from router(s), and hostname from rdns

sub getRouterInfo {

   my ( $ip, $community, $routerInfo ) = @_;

   print "Working on $ip\n" if $DEBUG;

   print "snmpwalk -v1 -c $community $ip $ROUTERIPMACMIB\n" if $DEBUG > 1;

   my $values = `snmpwalk -v1 -c $community $ip $ROUTERIPMACMIB`;

   my @lines = split( "\n", $values );

   foreach my $line ( @lines ) {

      $line =~ m/$ROUTERIPMACMIB\.([0-9]+)\.([0-9.]+)\s=\sHex-STRING:\s([0-9a-z ]+)/i;

      my $interface = $1;

      my $ip = $2;

      my $mac = &cleanMac( $3 );

      $routerInfo->{$mac}->{'ip'} = $ip;

      $routerInfo->{$mac}->{'interface'} = $interface;

      $routerInfo->{$mac}->{'hostname'} = gethostbyaddr( inet_aton( $ip ), AF_INET );

   }

}

# load tab delimited values from $filename into hashref $nonRouterEntries

# format is

# macaddress

#     'ip' = IP Address

#     'mac' = MAC Address

#     'hostname' = HostName

sub loadNonRouterEntries {

   my ( $nonRouterEntries, $filename ) = @_;

   print "In loadNonRouterEntries with $filename\n" if $DEBUG > 1;

   open FN,"<$filename" or die "Could not open $filename: $!\n";

   my $line = <FN>;

   chomp $line;

   my @headers = split( "\t", $line );

   my $macIndex = 0;

   while ( $headers[$macIndex] !~ 'mac' && $macIndex < @headers ) {

      $macIndex++;

   }

   if ( $macIndex >= @headers ) {

      warn "File $filename does not appear to contain a mac column\n";

      return;

   }

   while ( $line = <FN> ) {

      next if $line =~ m/^#/;

      chomp $line;

      my @values = split( "\t", $line );

      for( my $i = 0; $i < @headers; $i++ ) {

         $nonRouterEntries->{&cleanMac($values[$macIndex])}->{$headers[$i]} = lc $values[$i];

      }

   }

   close FN;

}

# merge nonRouterEntries into $routerARP, with $routerARP having precedence

sub updateRouterWithStatic {

   my ( $routerARP, $nonRouterEntries ) = @_;

   foreach my $mac ( keys %$nonRouterEntries ) {

      # assign the hostname from staticmaps if there is one, and either override is true, or routerARP doesn't have one

      $routerARP->{$mac}->{'hostname'} = $nonRouterEntries->{$mac}->{'hostname'}

         if ( $nonRouterEntries->{$mac}->{'hostname'} 

               && ( 

                  ! $routerARP->{$mac}->{'hostname'} 

                  || $nonRouterEntries->{$mac}->{'override'} 

                  )

               );

      # assign the hostname from staticmaps if there is one, and either override is true, or routerARP doesn't have one

      $routerARP->{$mac}->{'ip'} = $nonRouterEntries->{$mac}->{'ip'}

         if ( $nonRouterEntries->{$mac}->{'ip'} 

               && ( 

                  ! $routerARP->{$mac}->{'ip'} 

                  || $nonRouterEntries->{$mac}->{'override'} 

                  )

               );

   }

}

################################################################################

#              Main

################################################################################

# handle any command line parameters that may have been passed in

my $version = 0; # just used to determine if we should display the version

my $help = 0; # also if we want help

my $nosnmp = 0; # we do NOT want to run snmp commands

GetOptions (

            'debug|d=i'     => \$DEBUG,

            'nosnmp|n'      => \$nosnmp,

            'help|h'        => \$help,

            'version|v'     => \$version,

            ) or die "Error parsing command line\n";

if ( $help ) { &help() ; exit; }

if ( $version ) { use File::Basename; print basename($0) . " $VERSION\n"; exit; }

# Get configuration file into $config

my $config = &loadConfig( $CONFIGFILE );

print Dumper( $config ) if $DEBUG > 1;

die if $DEBUG > 4;

my $switchInfo = {}; # stores information about switches

my $macList = {}; # a list of all MAC addresses

# load the information for the switches into $switchInfo.

foreach my $switch ( keys %{$config->{'switches'}} ) {

   last if $nosnmp; # do not read switches if $nosnmp set

   my %ignoreList = map { $_ => 1 } @{ $config->{'switches'}->{$switch}->{'portsToIgnore'} }; # hash of ports to ignore

   my $ignoreList = \%ignoreList;

   print "ignoreList for $switch\n" . Dumper ($ignoreList) if $DEBUG > 2;

   # just get basic switch information, inlcuding a list of all ports which are active and not in portsToIgnore

   &getSwitchInfo( $switch, $config->{'switches'}->{$switch}->{'community'}, $ignoreList, $switchInfo );

   # get all the MAC's on this switch

   &getSwitchPortMacs( $switch, $config->{'switches'}->{$switch}->{'community'}, $ignoreList, $macList );

}

print "switchInfo\n" . Dumper( $switchInfo ) if $DEBUG > 2;

print "macList\n" . Dumper( $macList ) if $DEBUG > 2;

my $routerARP = {};

# Read the ARP table from the router(s)

foreach my $router ( keys %{$config->{'routers'}} ) {

   last if $nosnmp; # do not read routers if $nosnmp set

   &getRouterInfo( $router,  $config->{'routers'}->{$router}->{'community'}, $routerARP );

}

print "Routers\n" . Dumper ($routerARP ) if $DEBUG > 2;

# load non-router entries, if they exist

my $nonRouterEntries = {};

if ( defined ( $config->{'nonrouter'} ) ) {

   foreach my $filename ( @{$config->{'nonrouter'}} ) {

      &loadNonRouterEntries( $nonRouterEntries, $scriptDir . '/' . $filename );

   }

}

print "Non-Router Entries\n" . Dumper ( $nonRouterEntries ) if $DEBUG > 2;

# add in any staticmaps we may have. Note it will overwrite anything from files above

foreach my $mac ( keys %{$config->{'staticmaps'} } ) {

   $nonRouterEntries->{$mac}->{'hostname'} = $config->{'staticmaps'}->{$mac}->{'hostname'} if $config->{'staticmaps'}->{$mac}->{'hostname'};

   $nonRouterEntries->{$mac}->{'ip'} = $config->{'staticmaps'}->{$mac}->{'ip'} if $config->{'staticmaps'}->{$mac}->{'ip'};

   $nonRouterEntries->{$mac}->{'override'} = $config->{'staticmaps'}->{$mac}->{'override'} if $config->{'staticmaps'}->{$mac}->{'override'};

}

&updateRouterWithStatic( $routerARP, $nonRouterEntries );

print "routerInfo\n" . Dumper ( $routerARP ) if $DEBUG > 2;

#print Dumper( $macList ); die;

my $saveFile = {};

# read the saved state into memory if it exists

if ( -e $STATEFILE ) {

   my $yaml = YAML::Tiny->read( $STATEFILE );

   $saveFile = \%{ $yaml->[0] };

}

$saveFile->{'switchInfo'} = $switchInfo;

foreach my $mac ( keys %$macList ) {

   $saveFile->{'macList'}->{$mac} = $macList->{$mac};

   $saveFile->{'macList'}->{$mac}->{'hostname'} = $routerARP->{$mac}->{'hostname'};

   $saveFile->{'macList'}->{$mac}->{'ip'} = $routerARP->{$mac}->{'ip'};

}

#print Dumper( $saveFile ); die;

#print Dumper( $switchInfo); die;

# save the file

my $yaml = YAML::Tiny->new( $saveFile );

$yaml->write( $STATEFILE );

1;