Subversion Repositories camp_sysinfo_client_3

#!/usr/bin/env perl

use warnings;

use strict;

use Data::Dumper;

# Description: Use smartctl, lsblk and geom to get disk information

# will decode lsblk first. Then use geom to get information on BSD systems

# finally, smartctl will be used to gather additional information.

# 20200224 RWR v2.1

# large re-organization of code and inclusion to get basic information from lsblk if it is on the system

our $VERSION = '2.1';

# R. W. Rodolico

# grabs smart readings from all drives in system

# note that in the case of some hardware RAID controller, will list the components of a "drive" and the drive itself,

# so you may have up to twice the number of entries than you have physical drives, for example, if you have a megaraid

# controller where each physical drive is also a single logical drive.

# find our location and use it for searching for libraries

BEGIN {

   use FindBin;

   use File::Spec;

   use lib File::Spec->catdir($FindBin::Bin);

   use library;

}

exit 0 unless checkDate( 'm' ); # run this only on first of month

my %driveDefinitions; # this will be a global that everything will put info into

my %ignoreDriveTypes = ( # a list of drive "types" used by virtuals that we just ignore.

         'VBOX HARDDISK' => 1,

         );

# routine used by geom to process one block at a time.

# first parameter is a pointer to a hash to populate, the rest are

# considered to be a splice of an array that contains only one

# block. Returns the name of the device

sub doGeomBlock {

   my $hashPointer = shift;

#   die join( "\n", @_ ) . "\n";

   while ( my $line = shift ) {

      if ( $line ) {

         my ($key, $value) = split( ':', $line );

         if ( $key =~ m/^\d+\.\s+(.*)$/ ) {

            $key = $1;

         }

         $key = &trim( $key );

         $value = &trim( $value );

         $hashPointer->{$key} = $value;

      }

   }

#   die Dumper( $hashPointer );

   return $hashPointer->{'Name'} ? $hashPointer->{'Name'} : 'Unknown';

}

# grab data from geom command (BSD) and import parts of it into driveDefinitions

sub geom {

   my $line = 0;

   my $startBlock = 0;

   my $endBlock = 0;

   my @report = `geom disk list`;

   chomp @report;

   while ( $line < scalar( @report ) ) {

      #print "Working on $line\n";

      while ( $line < scalar( @report ) && $report[$line] !~ m/^Geom name:\s+(.*)$/ ) {

         $line++;

      }

      $endBlock = $line - 1;

      if ( $endBlock > $startBlock ) {

         my $thisDrive = {};

         my $key = &doGeomBlock( $thisDrive, @report[$startBlock..$endBlock] );

         # die "$key\n" . Dumper( $thisDrive );

         $key = '/dev/' . $key;

         $driveDefinitions{$key}{'Capacity'} = $thisDrive->{'Mediasize'} if defined $thisDrive->{'Mediasize'};

         if ( defined( $driveDefinitions{$key}{'Capacity'} ) && $driveDefinitions{$key}{'Capacity'} =~ m/^(\d+)/ ) {

            $driveDefinitions{$key}{'Capacity'} = $1;

         }

         $driveDefinitions{$key}{'Model'} = $thisDrive->{'descr'} if defined $thisDrive->{'descr'};

         $driveDefinitions{$key}{'Serial'} = $thisDrive->{'ident'} if defined $thisDrive->{'ident'};

         $driveDefinitions{$key}{'Sector Size'} = $thisDrive->{'Sectorsize'} if defined $thisDrive->{'Sectorsize'};

         $driveDefinitions{$key}{'Rotation'} = $thisDrive->{'rotationrate'} if defined $thisDrive->{'rotationrate'};

         $startBlock = $line;

#         die Dumper( $thisDrive );

      }

      $line++;

   }

}

# acquires information using lsblk, if it is available

# uses global %driveDefinitions to store the results

sub lsblk {

   eval ( 'use JSON qw( decode_json );' );

   if ( $@ ) {

      warn "Could not load JSON library\n";    

      return;

   }

   my $output = qx'lsblk -bdJO 2>/dev/null';

   # older versions do not have the O option, so we'll run it without

   $output = qx'lsblk -bdJ 2>/dev/null' if $?;

   my $drives = decode_json( join( '', $output ) );

   $drives = $drives->{'blockdevices'};

   while ( my $thisDrive = shift @{$drives} ) {

      if ( $thisDrive->{'type'} eq 'disk' ) {

         my $key = '/dev/' . $thisDrive->{'name'};

         $driveDefinitions{$key}{'Capacity'} = $thisDrive->{'size'};

         $driveDefinitions{$key}{'Model'} = $thisDrive->{'model'} if defined $thisDrive->{'model'};

         $driveDefinitions{$key}{'Serial'} = $thisDrive->{'serial'} if defined $thisDrive->{'serial'};

      }

   }

}

sub getSmartInformationReport {

   my ($drive, $type) = @_;

   $type = '' if ( $type =~ m/scsi/ );

   my @report = `smartctl -i $drive $type`;

   chomp @report;

   my %reportHash;

   for ( my $i = 0; $i < @report; $i++ ) {

      if ( $report[$i] =~ m/^(.*):(.*)$/ ) {

         $reportHash{$1} = trim($2);

      }

   }

   return \%reportHash;

} # getSmartInformationReport

sub getSmartAttributeReport {

   my ($drive, $type) = @_;

   $type = '' if ( $type =~ m/scsi/ );

   my @report = `smartctl -A $drive $type`;

   chomp @report;

   my %reportHash;

   my %headers;

   # bypass all the header information

   my $i;

   for ( $i = 0; $i < @report && $report[$i] !~ m/^ID#/; $i++ ) {}

   if ( $i < @report ) { # did we get an actual report? some drives will not give us one

      my $char = 0;

      while ( $char < length($report[$i]) ) {

         substr( $report[$i],$char ) =~ m/^([^ ]+\s*)/;

         my $header = $1;

         my $start = $char;

         my $length = length($header);

         if ( $header = &trim( $header ) ) {

            $headers{$header}{'start'} = $start;

            $headers{$header}{'length'} = $length-1;

         }

         $char += $length;

      }

      while ( ++$i < @report ) {

         last unless $report[$i];

         my $id = &trim(substr( $report[$i], $headers{'ID#'}{'start'}, $headers{'ID#'}{'length'} ));

         my $name = &trim(substr( $report[$i], $headers{'ATTRIBUTE_NAME'}{'start'}, $headers{'ATTRIBUTE_NAME'}{'length'} ));

         my $value = &trim(substr( $report[$i], $headers{'RAW_VALUE'}{'start'} ));

         $reportHash{$id}{'value'} = $value;

         $reportHash{$id}{'name'} = $name;

      }

   }

   #print Dumper( \%reportHash ); die;

   return \%reportHash;

}

sub getAttributes {

   my ($drive,$type,$sectorSize) = @_;

   my $report = &getSmartAttributeReport( $drive, $type );

   # first let's get total disk writes

   if ( defined( $report->{'241'} ) ) {

      $sectorSize =~ m/^(\d+)/;

      $driveDefinitions{$drive}{'writes'} = $report->{'241'} * $sectorSize;

   }

   # find total uptime

   if ( defined( $report->{'9'} ) ) {

      $report->{'9'}->{'value'} =~ m/^(\d+)/;

      $driveDefinitions{$drive}{'uptime'} = $1;

   }

}

sub getInformation {

   my ($drive, $type) = @_;

   my $report = &getSmartInformationReport( $drive, $type );

   my %info;

   my %keys = ( 

                  'Model Family'  => { 

                                          'tag' => 'Make',

                                          'regex' => '(.*)'

                                      },

                  'Device Model'  => { 

                                          'tag' => 'Model',

                                          'regex' => '(.*)'

                                      },

                  'Serial number' => { 

                                          'tag' => 'Serial',

                                          'regex' => '(.*)'

                                      },

                  'Serial Number' => { 

                                          'tag' => 'Serial',

                                          'regex' => '(.*)'

                                      },

                  'User Capacity' => { 

                                          'tag' => 'Capacity',

                                          'regex' => '([0-9,]+)'

                                      },

                  'Logical block size' =>{ 

                                          'tag' => 'Sector Size',

                                          'regex' => '(\d+)'

                                      },

                  'Sector Size'   => { 

                                          'tag' => 'Sector Size',

                                          'regex' => '(\d+)'

                                      },

                  'Rotation Rate' => { 

                                          'tag' => 'Rotation',

                                          'regex' => '(.*)'

                                      },

               );

   foreach my $key ( keys %keys ) {

      if ( defined( $report->{$key} ) && $report->{$key} =~ m/$keys{$key}->{'regex'}/ ) {

         $driveDefinitions{$drive}{$keys{$key}->{'tag'}} = $1;

      }

   }

}

sub smartctl {

   # Get all the drives on the system

   my %allDrives = map { $_ =~ '(^[a-z0-9/]+)\s+(.*)\#'; ($1,$2) } `smartctl --scan`;

   # output the drives and information as tab delimited,

   foreach my $thisDrive ( sort keys %allDrives ) {

      $driveDefinitions{$thisDrive}{'type'} = $allDrives{$thisDrive};

      &getInformation( $thisDrive, $allDrives{$thisDrive} );

      #print Dumper( $info ); die;

      my $attributes = &getAttributes( $thisDrive, $allDrives{$thisDrive}, $driveDefinitions{$thisDrive}{'Sector Size'} );

      #print Dumper( $attributes ); die;

      #print Dumper( $info ); die;

   }

}

# category we will use for all values found

# see sysinfo for a list of valid categories

my $CATEGORY = 'attributes';

# run the commands necessary to do whatever you want to do

# The library entered above has some helper routines

# validCommandOnSystem -- passed a name, returns the fully qualified path or '' if it does not exist

# cleanUp - passed a delimiter and a string, does the following (delimiter can be '')

#           chomps the string (removes trailing newlines)

#           removes all text BEFORE the delimiter, the delimiter, and any whitespace

#           thus, the string 'xxI Am x  a weird string' with a newline will become

#           'a weird string' with no newline

# now, return the tab delimited output (to STDOUT). $CATEGORY is the first

# item, name as recognized by sysinfo is the second and the value is

# the last one. For multiple entries, place on separate lines (ie, newline separated)

# check for commands we want to run

my %commands = ( 

                  'smartctl' => '',

                  'lsblk' => '',

                  'geom' => '',

               );

# check the commands for validity

foreach my $command ( keys %commands ) {

   $commands{$command} = &validCommandOnSystem( $command );

}

# bail if we don't have the commands we need

exit 1 unless $commands{'smartctl'} || $commands{'lsblk'} || $commands{'geom'};

# first, get basic information using lsblk for linux systems

&lsblk() if $commands{'lsblk'};

# now, try geom for bsd systems

&geom() if $commands{'geom'};

#die Dumper( \%driveDefinitions );

# finally, populate whatever using smartctl if it is on system.

&smartctl() if $commands{'smartctl'};

for my $drive ( sort keys %driveDefinitions ) {

   # don't print iSCSI definitions

   next if defined( $driveDefinitions{$drive}{'Transport protocol'} ) && $driveDefinitions{$drive}{'Transport protocol'} eq 'ISCSI';

   #also, blow off our ignored types

   next if ( defined( $driveDefinitions{$drive}{'Model'} ) && defined( $ignoreDriveTypes{ $driveDefinitions{$drive}{'Model'} }  ) );

   # remove comma's from capacity

   $driveDefinitions{$drive}{'Capacity'} =~ s/,//g if $driveDefinitions{$drive}{'Capacity'};

   foreach my $key ( sort keys %{$driveDefinitions{$drive}} ) {

      print "$CATEGORY\t$drive $key\t$driveDefinitions{$drive}{$key}\n";

   }

}

exit 0;