Subversion Repositories camp_sysinfo_client_3

# install.pl

#

# installer for perl script, in this case, sysinfo

#

# Revision history

#

# Version 1.1.7 20161010 RWR

# Added ability to validate required libraries are installed

#

# version 1.2 20170327 RWR

# did some major modifications to correctly work on BSD systems also

#

# version 2.0 20190330 RWR

# changed it so all configs are YAML

#

# version 3.0 20191105 RWR

# set up so all options are presented on initial screen

# user can choose options to edit

# rest of install is automatic

our $VERSION = '3.0';

# find our location and use it for searching for libraries

BEGIN {

   eval( 'use YAML::Tiny' );

}

use sysinfoconf;

use Data::Dumper;

use File::Basename;

use Getopt::Long;

our %install;

our %operatingSystems;

our %libraries;

our %binaries;

do "$sourceDir/installer_config.pl";

Getopt::Long::Configure ("bundling"); # allow -vd --os='debian'

# $verbose can have the following values

# 0 - do everything

# 1 - Do everything except the install, display what would be done

# 2 - Be verbose to STDERR

# 3 - Be very verbose

my $verbose = 0; # if test mode, simply show what would be done

my $dryRun = 0;

my $os;

my $help = 0;

my @messages; # stores any messages we want to show up at the end

my @feedback; # store feedback when we execute command line actions

my %configuration;

# simple display if --help is passed

sub help {

   my $oses = join( ' ', keys %operatingSystems );

   print <<END

$0 --verbose=x --os="osname" --dryrun --help --version

--os      - osname is one of [$oses]

--dryrun  - do not actually do anything, just tell you what I'd do

--verbose - x is 0 (normal) to 3 (horrible)

END

}

# attempt to locate the operating system.

# if found, will set some defaults for it.

sub setUpOperatingSystemSpecific {

   my ( $install, $operatingSystems, $os, $installDir ) = @_;

   print "They passed $os in as the \$os\n" if $verbose > 2;

   if ( $os ) {

      # We found the OS, set up some defaults

      $$install{'os'} = $os;

      print "Setting keys for operating system\n" if $verbose > 2;

      # merge operatingSystems into install

      foreach my $key ( keys %{$operatingSystems->{$os}} ) {

         if ( $key eq 'files' ) {

            $install->{'files'} = { %{$install->{'files'}}, %{$operatingSystems->{$os}->{'files'}} }

         } else {

            $install->{$key} = $operatingSystems->{ $os }->{$key};

         }

      } # if it is a known OS

   } # if

   return $os;

} # getOperatingSystem

# validates the libraries needed exist

# simply eval's each library. If it doesn't exist, creates a list of

# commands to be executed to install it, and displays missing libraries

# offering to install them if possible.

sub validateLibraries {

   my ( $libraries, $os ) = @_;

   my %return;

   foreach my $lib ( keys %$libraries ) {

      print "Checking on libarary $lib\n" if $verbose;

      eval( "use $lib;" );

      if ( $@ ) {

         $return{ $lib } = $libraries->{$lib}->{$os} ? $libraries->{$lib}->{$os} : 'UNK';

      }

   }

   return \%return;

} # validateLibraries

sub validateBinaries {

   my %return;

   }

# locate all items in $hash which have one of the $placeholder elements in it

# and replace, ie <binddir> is replaced with the actual binary directory

sub doPlaceholderSubstitution {

   my ($hash, $placeholder) = @_;

   return if ref $hash ne 'HASH';

   foreach my $key ( keys %$hash ) {

      if ( ref( $$hash{$key} ) ) {

         &doPlaceholderSubstitution( $$hash{$key}, $placeholder );

      } else {

         foreach my $place ( keys %$placeholder ) {

            $$hash{$key} =~ s/$place/$$placeholder{$place}/;

         } # foreach

      } # if..else

   } # foreach

   return;

}

# This will go through and first, see if anything is a directory, in

# which case, we'll create new entries for all files in there.

# then, it will do keyword substitution of <bindir> and <confdir>

# to populate the target.

# When this is done, each file should have a source and target that is

# a fully qualified path and filename

sub populateSourceDir {

   my ( $install, $sourceDir ) = @_;

   my %placeHolders = 

      ( 

        '<bindir>' => $$install{'bindir'},

        '<confdir>' => $$install{'confdir'},

        '<default owner>' => $$install{'default owner'},

        '<default group>' => $$install{'default group'},

        '<default permission>' => $$install{'default permission'},

        '<installdir>' => $sourceDir

      );

   my $allFiles = $$install{'files'};

   # find all directory entries and load files in that directory into $$install{'files'}

   foreach my $dir ( keys %$allFiles ) {

      if ( defined( $$allFiles{$dir}{'type'} ) && $$allFiles{$dir}{'type'} eq 'directory' ) {

         print "Found directory $dir\n" if $verbose > 2;

         if ( opendir( my $dh, "$sourceDir/$dir" ) ) {

            my @files = map{ $dir . '/' . $_ } grep { ! /^\./ && -f "$sourceDir/$dir/$_" } readdir( $dh );

            print "\tFound files " . join( ' ', @files ) . "\n" if $verbose > 2;

            foreach my $file ( @files ) {

               $$allFiles{ $file }{'type'} = 'file';

               if ( $dir eq 'modules' ) {

                  $$allFiles{ $file }{'permission'} = ( $file =~ m/$$install{'modules'}/ ) ? '0700' : '0600';

               } else {

                  $$allFiles{ $file }{'permission'} = $$allFiles{ $dir }{'permission'};

               }

               $$allFiles{ $file }{'owner'} = $$allFiles{ $dir }{'owner'};

               $$allFiles{ $file }{'target'} = $$allFiles{ $dir }{'target'};

            } # foreach

            closedir $dh;

         } # if opendir

      } # if it is a directory

   } # foreach

   # find all files, and set the source directory, and add the filename to

   # the target

   foreach my $file ( keys %$allFiles ) {

      $$allFiles{$file}{'source'} = "$sourceDir/$file";

      $$allFiles{$file}{'target'} .= "/$file";

   } # foreach

   # finally, do place holder substitution. This recursively replaces all keys

   # in  %placeHolders with the values.

   &doPlaceholderSubstitution( $install, \%placeHolders );

   print Dump( $install ) if $verbose > 2;

   return 1;

} # populateSourceDir

sub GetPermission {

   my $install = shift;

   print "Ready to install, please verify the following\n";

   print "A. Operating System:  " . $install->{'os'} . "\n";

   print "B. Installation Type: " . $install->{'action'} . "\n";

   print "C. Using Seed file: " . $install->{'configuration seed file'} . "\n" if -e $install->{'configuration seed file'};

   print "D. Target Binary Directory: " . $install->{'bindir'} . "\n";

   print "E. Target Configuration Directory: " . $install->{'confdir'} . "\n";

   print "F. Automatic Running: " . ( $install->{'crontab'} ? $install->{'crontab'} : 'No' ) . "\n";

   print "G. Install Missing Perl Libraries\n";

   foreach my $task ( sort keys %{ $install->{'missing libraries'} } ) {

      print "\t$task -> " . $install->{'missing libraries'}->{$task} . "\n";

   }

   print "H. Install Missing Binaries\n";

   foreach my $task ( sort keys %{ $install->{'missing binaries'} } ) {

      print "\t$task -> " . $install->{'missing binaries'}->{$task} . "\n";

   }

   return &yesno( "Do you want to proceed?" );

}

# note, this fails badly if you stick non-numerics in the version number

# simply create a "number" from the version which may have an arbitrary

# number of digits separated by a period, for example

# 1.2.5

# while there are digits, divide current calculation by 100, then add the last

# digit popped of. So, 1.2.5 would become

# 1 + 2/100 + 5/10000, or 1.0205

# and 1.25.16 would become 1.2516

# 

# Will give invalid results if any set of digits is more than 99

   my $return = 0;

   while ( @t ) {

      $return /= 100;

   }

   #print "$return\n";

   return $return;

# there is a file named VERSIONS. We get the values out of the install

# directory and (if it exists) the target so we can decide what needs

# to be updated.

sub getVersions {

   my $install = shift;

   my $currentVersionFile = $install->{'files'}->{'VERSION'}->{'target'};

   my $newVersionFile = $install->{'files'}->{'VERSION'}->{'source'};

   if ( open FILE,"<$currentVersionFile" ) {

      while ( my $line = <FILE> ) {

         chomp $line;

         my ( $filename, $version, $checksum ) = split( "\t", $line );

         $install{'files'}->{$filename}->{'installed version'} = $version ? $version : '';

      }

      close FILE;

   }

   if ( open FILE,"<$newVersionFile" ) {

      while ( my $line = <FILE> ) {

         chomp $line;

         my ( $filename, $version, $checksum ) = split( "\t", $line );

         $install->{'files'}->{$filename}->{'new version'} = $version ? $version : '';

      }

      close FILE;

   }

   foreach my $file ( keys %{$$install{'files'}} ) {

      $install{'files'}->{$file}->{'installed version'} = -2 unless defined $install->{'files'}->{$file}->{'installed version'};

      $install{'files'}->{$file}->{'new version'} = -1 unless defined $install->{'files'}->{$file}->{'new version'};

   }

   return 1;

} # getVersions

# this actually does the installation, except for the configuration

sub doInstall {

   my $install = shift;

   my $fileList = $install->{'files'};

   &checkDirectoryExists( $install->{'bindir'} . '/', $install->{'default permission'}, $install->{'default owner'} . ':' . $install->{'default group'} );

   foreach my $file ( keys %$fileList ) {

      next unless ( $fileList->{$file}->{'type'} && $fileList->{$file}->{'type'} eq 'file' );

      next if $install->{'action'} eq 'upgrade' && ! defined( $fileList->{$file}->{'installed version'} )

              ||

              ( &dotVersion2Number( $fileList->{$file}->{'new version'} ) <= &dotVersion2Number($fileList->{$file}->{'installed version'} ) );

      &checkDirectoryExists( $fileList->{$file}->{'target'}, $install->{'default permission'}, $install->{'default owner'} . ':' . $install->{'default group'} );

      &runCommand( 

            "cp $fileList->{$file}->{'source'} $fileList->{$file}->{'target'}",

            "chmod $fileList->{$file}->{'permission'} $fileList->{$file}->{'target'}",

            "chown $fileList->{$file}->{'owner'} $fileList->{$file}->{'target'}"

            );

      # if there is a post action, run it and store any return in @feedback

      push @feedback, `$fileList->{$file}->{'post action'}` if defined $fileList->{$file}->{'post action'};

      # if there is a message to be passed, store it in @messages

      push @messages, $fileList->{$file}->{'meesage'} if defined $fileList->{$file}->{'message'};

   } # foreach file

   # set up crontab, if necessary

   &runCommand( $install->{'crontab'} ) if defined ( $install->{'crontab'} );

   return 1;

}

sub postInstall {

   # seed configuration, if needed

   if ( $$install{'build config'} ) {

      my $config;

      my @fileList;

      # overwrite values in the previous. We do a push so the first value pushed

      # is processed last, ie has higher priority.

      push @fileList, $install->{'configuration'}->{'old configuration file'};

      push @fileList, $install->{'configuration'}->{'configuration file'};

      my $seedFile = $install->{'configuration'}->{'configuration seed file'};

      if ( -e $install->{'configuration seed file'} ) {

         push @fileList, $install->{'configuration seed file'};

      } # if preload seed file

      $config = &makeConfig( @fileList );

      # if ScriptDirs and moduleDirs not populated, do so from our configuration

      if ( ! $$config{'scriptDirs'} || ! scalar @{ $$config{'scriptDirs'} }  ) {

         $config->{'scriptDirs'} = [ $install->{'files'}->{'scripts'}->{'target'} ];

      }

      if ( ! $$config{'moduleDirs'} || ! @{ $$config{'moduleDirs'} }  ) {

         $config->{'moduleDirs'} = [ $install->{'files'}->{'modules'}->{'target'} ];

      }

      my $content = &showConf( $config );

      return &writeConfig( '' , $content );

   } # if we are building/merging configuration

}

# installs binaries and libraries

   foreach my $action ( @actions ) {

      &runCommand( $action );

################################################################

#               Main Code                                      #

################################################################

# handle any command line parameters that may have been passed in

GetOptions (

            "verbose|v=i" => \$verbose, # verbosity level, 0-9

            "os|o=s"      => \$os,      # pass in the operating system

            "dryrun|n"    => \$dryRun,  # do NOT actually do anything

            'help|h'      => \$help,

            'version|V'   => \$version

            ) or die "Error parsing command line\n";

if ( $help ) { &help() ; exit; }

if ( $version ) { print "$0 version $VERSION\n"; exit; }

$install{'os'} = &setUpOperatingSystemSpecific( \%install, \%operatingSystems, $os ? $os : `$sourceDir/determineOS`, $sourceDir );

$install{'missing libraries'} = &validateLibraries( \%libraries, $install{'os'} );

$install{'missing binaries'} = &validateBinaries( \%binaries, $install{'os'} );

&getInstallActions( \%install );

populateSourceDir( \%install, $sourceDir );

if ( &GetPermission( \%install ) ) {

   &installOSStuff( \%install );

   &getVersions( \%install ) unless $install{'action'} eq 'new';

#   print Dump( \%install );

#   <>;

   &doInstall( \%install );

} else {

   die "Please fix whatever needs to be done and try again\n";

}

my $filename = &postInstall( \%install );

my $confFileName = $install{'configuration'}{'configuration file'};

print "Running configure.pl with $filename, output to $confFileName\n";

exec( "$install{bindir}/configure.pl -f $filename -o $confFileName" );