Rev 198 | Rev 244 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed
#!/usr/bin/env perl
use warnings;
use strict;
use Data::Dumper;
# Description: Use smartctl, lsblk and geom to get disk information
# will decode lsblk first. Then use geom to get information on BSD systems
# finally, smartctl will be used to gather additional information.
# 20200224 RWR v2.1
# large re-organization of code and inclusion to get basic information from lsblk if it is on the system
our $VERSION = '2.1';
# R. W. Rodolico
# grabs smart readings from all drives in system
# note that in the case of some hardware RAID controller, will list the components of a "drive" and the drive itself,
# so you may have up to twice the number of entries than you have physical drives, for example, if you have a megaraid
# controller where each physical drive is also a single logical drive.
# find our location and use it for searching for libraries
BEGIN {
use FindBin;
use File::Spec;
use lib File::Spec->catdir($FindBin::Bin);
use library;
}
exit 0 unless checkDate( 'm' ); # run this only on first of month
my %driveDefinitions; # this will be a global that everything will put info into
my %ignoreDriveTypes = ( # a list of drive "types" used by virtuals that we just ignore.
'VBOX HARDDISK' => 1,
);
# routine used by geom to process one block at a time.
# first parameter is a pointer to a hash to populate, the rest are
# considered to be a splice of an array that contains only one
# block. Returns the name of the device
sub doGeomBlock {
my $hashPointer = shift;
# die join( "\n", @_ ) . "\n";
while ( my $line = shift ) {
if ( $line ) {
my ($key, $value) = split( ':', $line );
if ( $key =~ m/^\d+\.\s+(.*)$/ ) {
$key = $1;
}
$key = &trim( $key );
$value = &trim( $value );
$hashPointer->{$key} = $value;
}
}
# die Dumper( $hashPointer );
return $hashPointer->{'Name'} ? $hashPointer->{'Name'} : 'Unknown';
}
# grab data from geom command (BSD) and import parts of it into driveDefinitions
sub geom {
my $line = 0;
my $startBlock = 0;
my $endBlock = 0;
my @report = `geom disk list`;
chomp @report;
while ( $line < scalar( @report ) ) {
#print "Working on $line\n";
while ( $line < scalar( @report ) && $report[$line] !~ m/^Geom name:\s+(.*)$/ ) {
$line++;
}
$endBlock = $line - 1;
if ( $endBlock > $startBlock ) {
my $thisDrive = {};
my $key = &doGeomBlock( $thisDrive, @report[$startBlock..$endBlock] );
# die "$key\n" . Dumper( $thisDrive );
$key = '/dev/' . $key;
$driveDefinitions{$key}{'Capacity'} = $thisDrive->{'Mediasize'} if defined $thisDrive->{'Mediasize'};
if ( defined( $driveDefinitions{$key}{'Capacity'} ) && $driveDefinitions{$key}{'Capacity'} =~ m/^(\d+)/ ) {
$driveDefinitions{$key}{'Capacity'} = $1;
}
$driveDefinitions{$key}{'Model'} = $thisDrive->{'descr'} if defined $thisDrive->{'descr'};
$driveDefinitions{$key}{'Serial'} = $thisDrive->{'ident'} if defined $thisDrive->{'ident'};
$driveDefinitions{$key}{'Sector Size'} = $thisDrive->{'Sectorsize'} if defined $thisDrive->{'Sectorsize'};
$driveDefinitions{$key}{'Rotation'} = $thisDrive->{'rotationrate'} if defined $thisDrive->{'rotationrate'};
$startBlock = $line;
# die Dumper( $thisDrive );
}
$line++;
}
}
# acquires information using lsblk, if it is available
# uses global %driveDefinitions to store the results
sub lsblk {
eval ( 'use JSON qw( decode_json );' );
if ( $@ ) {
warn "Could not load JSON library\n";
return;
}
my $output = qx'lsblk -bdJO 2>/dev/null';
# older versions do not have the O option, so we'll run it without
$output = qx'lsblk -bdJ 2>/dev/null' if $?;
my $drives = decode_json( join( '', $output ) );
$drives = $drives->{'blockdevices'};
while ( my $thisDrive = shift @{$drives} ) {
if ( $thisDrive->{'type'} eq 'disk' ) {
my $key = '/dev/' . $thisDrive->{'name'};
$driveDefinitions{$key}{'Capacity'} = $thisDrive->{'size'};
$driveDefinitions{$key}{'Model'} = $thisDrive->{'model'} if defined $thisDrive->{'model'};
$driveDefinitions{$key}{'Serial'} = $thisDrive->{'serial'} if defined $thisDrive->{'serial'};
}
}
}
sub getSmartInformationReport {
my ($drive, $type) = @_;
$type = '' if ( $type =~ m/scsi/ );
my @report = `smartctl -i $drive $type`;
chomp @report;
my %reportHash;
for ( my $i = 0; $i < @report; $i++ ) {
if ( $report[$i] =~ m/^(.*):(.*)$/ ) {
$reportHash{$1} = trim($2);
}
}
return \%reportHash;
} # getSmartInformationReport
sub getSmartAttributeReport {
my ($drive, $type) = @_;
$type = '' if ( ! defined( $type ) || $type =~ m/scsi/ );
my @report = `smartctl -A $drive $type`;
chomp @report;
my %reportHash;
my %headers;
# bypass all the header information
my $i;
for ( $i = 0; $i < @report && $report[$i] !~ m/^ID#/; $i++ ) {}
if ( $i < @report ) { # did we get an actual report? some drives will not give us one
my $char = 0;
while ( $char < length($report[$i]) ) {
substr( $report[$i],$char ) =~ m/^([^ ]+\s*)/;
my $header = $1;
my $start = $char;
my $length = length($header);
if ( $header = &trim( $header ) ) {
$headers{$header}{'start'} = $start;
$headers{$header}{'length'} = $length-1;
}
$char += $length;
}
while ( ++$i < @report ) {
last unless $report[$i];
my $id = &trim(substr( $report[$i], $headers{'ID#'}{'start'}, $headers{'ID#'}{'length'} ));
my $name = &trim(substr( $report[$i], $headers{'ATTRIBUTE_NAME'}{'start'}, $headers{'ATTRIBUTE_NAME'}{'length'} ));
my $value = &trim(substr( $report[$i], $headers{'RAW_VALUE'}{'start'} ));
$reportHash{$id}{'value'} = $value;
$reportHash{$id}{'name'} = $name;
}
}
#print Dumper( \%reportHash ); die;
return \%reportHash;
}
sub getAttributes {
my ($drive,$type,$sectorSize) = @_;
my $report = &getSmartAttributeReport( $drive, $type );
# first let's get total disk writes
if ( defined( $report->{'241'} ) && defined( $sectorSize ) ) {
$sectorSize =~ m/^(\d+)/;
$driveDefinitions{$drive}{'writes'} = $report->{'241'} * $sectorSize;
}
# find total uptime
if ( defined( $report->{'9'} ) ) {
$report->{'9'}->{'value'} =~ m/^(\d+)/;
$driveDefinitions{$drive}{'uptime'} = $1;
}
}
sub getInformation {
my ($drive, $type) = @_;
my $report = &getSmartInformationReport( $drive, $type );
my %info;
my %keys = (
'Model Family' => {
'tag' => 'Make',
'regex' => '(.*)'
},
'Device Model' => {
'tag' => 'Model',
'regex' => '(.*)'
},
'Serial number' => {
'tag' => 'Serial',
'regex' => '(.*)'
},
'Serial Number' => {
'tag' => 'Serial',
'regex' => '(.*)'
},
'User Capacity' => {
'tag' => 'Capacity',
'regex' => '([0-9,]+)'
},
'Logical block size' =>{
'tag' => 'Sector Size',
'regex' => '(\d+)'
},
'Sector Size' => {
'tag' => 'Sector Size',
'regex' => '(\d+)'
},
'Rotation Rate' => {
'tag' => 'Rotation',
'regex' => '(.*)'
},
);
foreach my $key ( keys %keys ) {
if ( defined( $report->{$key} ) && $report->{$key} =~ m/$keys{$key}->{'regex'}/ ) {
$driveDefinitions{$drive}{$keys{$key}->{'tag'}} = $1;
}
}
}
sub smartctl {
# Get all the drives on the system
my %allDrives;
eval{
%allDrives = map { $_ =~ '(^[a-z0-9/]+)\s+(.*)\#'; ($1,$2) } `smartctl --scan`;
};
return if ( $@ ); # we failed to get anything back
# output the drives and information as tab delimited,
foreach my $thisDrive ( sort keys %allDrives ) {
$driveDefinitions{$thisDrive}{'type'} = $allDrives{$thisDrive};
&getInformation( $thisDrive, $allDrives{$thisDrive} );
#print Dumper( $info ); die;
my $attributes = &getAttributes( $thisDrive, $allDrives{$thisDrive}, $driveDefinitions{$thisDrive}{'Sector Size'} );
#print Dumper( $attributes ); die;
#print Dumper( $info ); die;
}
}
# category we will use for all values found
# see sysinfo for a list of valid categories
my $CATEGORY = 'attributes';
# run the commands necessary to do whatever you want to do
# The library entered above has some helper routines
# validCommandOnSystem -- passed a name, returns the fully qualified path or '' if it does not exist
# cleanUp - passed a delimiter and a string, does the following (delimiter can be '')
# chomps the string (removes trailing newlines)
# removes all text BEFORE the delimiter, the delimiter, and any whitespace
# thus, the string 'xxI Am x a weird string' with a newline will become
# 'a weird string' with no newline
# now, return the tab delimited output (to STDOUT). $CATEGORY is the first
# item, name as recognized by sysinfo is the second and the value is
# the last one. For multiple entries, place on separate lines (ie, newline separated)
# check for commands we want to run
my %commands = (
'smartctl' => '',
'lsblk' => '',
'geom' => '',
);
# check the commands for validity
foreach my $command ( keys %commands ) {
$commands{$command} = &validCommandOnSystem( $command );
}
# bail if we don't have the commands we need
exit 1 unless $commands{'smartctl'} || $commands{'lsblk'} || $commands{'geom'};
# first, get basic information using lsblk for linux systems
&lsblk() if $commands{'lsblk'};
# now, try geom for bsd systems
&geom() if $commands{'geom'};
#die Dumper( \%driveDefinitions );
# finally, populate whatever using smartctl if it is on system.
&smartctl() if $commands{'smartctl'};
for my $drive ( sort keys %driveDefinitions ) {
# don't print iSCSI definitions
next if defined( $driveDefinitions{$drive}{'Transport protocol'} ) && $driveDefinitions{$drive}{'Transport protocol'} eq 'ISCSI';
#also, blow off our ignored types
next if ( defined( $driveDefinitions{$drive}{'Model'} ) && defined( $ignoreDriveTypes{ $driveDefinitions{$drive}{'Model'} } ) );
# remove comma's from capacity
$driveDefinitions{$drive}{'Capacity'} =~ s/,//g if $driveDefinitions{$drive}{'Capacity'};
foreach my $key ( sort keys %{$driveDefinitions{$drive}} ) {
print "$CATEGORY\t$drive $key\t$driveDefinitions{$drive}{$key}\n" if defined $driveDefinitions{$drive}{$key};
}
}
exit 0;