Rev 9 | Blame | Last modification | View Log | RSS feed
#! /usr/bin/perl -w
my $TESTING = 1;
my %installationTypes = (
'ipfire' => {
'post process' => \&ipfire
}
);
my %installation = (
'1. Configuration Directory' => '/etc/camp',
'2. Modules Directory' => 'modules',
'3. Scripts Directory' => 'scripts',
'4. Executable Directory' => '/usr/bin'
);
my %configuration;
my %packageActions = (
'modules' => {
'type' => 'directory',
'target' => '2. Modules Directory',
'owner' => 'root:root',
'dir perms' => '0755',
'file perms' => '0755'
},
'scripts' => {
'type' => 'directory',
'target' => '3. Scripts Directory',
'owner' => 'root:root',
'dir perms' => '0755',
'file perms' => '0755'
},
'notes' => {
'type' => 'file',
'target' => '1. Configuration Directory',
'owner' => 'root:root',
'dir perms' => '0755',
'file perms' => '0644'
},
'sysinfo_client' => {
'type' => 'file',
'target' => '4. Executable Directory',
'owner' => 'root:root',
'dir perms' => '0755',
'file perms' => '0755',
'cron' => 1
},
'install.pl' => {
'type' => 'file',
'target' => '1. Configuration Directory',
'owner' => 'root:root',
'dir perms' => '0755',
'file perms' => '0755',
'cron' => 1
},
'sysinfo.conf.template' => {
'type' => 'file',
'target' => '1. Configuration Directory',
'owner' => 'root:root',
'dir perms' => '0755',
'file perms' => '0644'
}
);
my $installationType;
my $cronLocation;
my $installMode;
# prompt the user for a response, then allow them to enter it
# the first response is considered the default and is printed
# in all caps if more than one exists
# first answer is used if they simply press the Enter
# key. The response is returned all lower case if more than one
# exists.
# it is assumed
sub getAnswer {
my ( $prompt, @answers ) = @_;
my $onlyOneAnswer = scalar( @answers ) == 1;
print $prompt . '[';
$answers[0] = uc $answers[0] unless $onlyOneAnswer;
print join( '/', @answers ) . ']: ';
$thisAnswer = <>;
chomp $thisAnswer;
$thisAnswer = $answers[0] unless $thisAnswer;
return $onlyOneAnswer ? lc $thisAnswer : $thisAnswer;
}
sub checkInstall {
my $installed = `which sysinfo-client`;
my $action;
chomp $installed;
my $oldconf = (-f '/etc/sysinfo/sysinfo.conf' ) ? '/etc/sysinfo/sysinfo.conf' : '';
if ( $installed ) {
$action = &getAnswer( 'Application appears to already be installed\nWhat do you want to do', ('configure','remove') );
} else {
my $useOldConf = &getAnswer( 'Doing a fresh install, and old sysinfo configuration exists, use it for defaults?',('y','n') ) if $oldconf;
$action = 'install';
$action .= ':' . $oldconf if $useOldConf eq 'y';
}
return $action;
}
# simply attempts to detect the operating system so we can do OS
# specific actions at the end.
sub getOperatingSystem {
my @OSTypes = ( 'ipfire','debian' );
my $OS = `uname -a`;
foreach $osType ( @OSTypes ) {
return $osType if $OS =~ m/$osType/i;
}
return '';
} # getOperatingSystem
# see if we can find a cron of some kind that will run the process
# daily
sub findCron {
while ( $location = shift ) {
return $location if -d $location;
}
return '';
}
sub customizeInstall {
my ( $installation, $cronLocation ) = @_;
# Allow user to customize the installation paths
foreach my $answer ( sort keys %$installation ) {
if ( $answer eq '2. Modules Directory' or $answer eq '3. Scripts Directory' ) {
$$installation{$answer} = $$installation{'1. Configuration Directory'} . '/' . $$installation{$answer};
}
$$installation{$answer} = &getAnswer( $answer, ( $$installation{$answer} ) );
}
$$cronLocation = &getAnswer( 'Link executable into which location', ( $$cronLocation ) );
}
sub makeDirectory {
my ( $directory, $owner, $permissions ) = @_;
return if -d $directory;
# make_path is very good and efficient, if File is installed, so we try it
eval { use File::Path 'make_path'; };
if ( $@ ) {
if ( $TESTING ) {
print "Using OS to create $directory\n";
print "mkdir -p $directory\n";
print "chown $owner $directory\n";
print "chmod $permissions $directory\n";
return;
}
`mkdir -p $directory`;
`chown $owner $directory`;
`chmod $permissions $directory`;
die "Could not create directory [$directory]\n" unless -d $directory;
} else { # we could not load library, so do it via the OS
if ( $TESTING ) {
print "Using make_path to create $directory\n";
print "make_path( $directory, { mode => $permissions, owner=>$owner } )\n";
return;
}
make_path( $directory, { mode => $permissions, owner=>$owner, error => \my $err } );
die "Could not create directory [$directory]\n" if @$err;
}
}
sub doInstall {
my ( $installation, $cronLocation, $packageActions ) = @_;
foreach my $item ( keys %$packageActions ) {
&makeDirectory(
$$installation{$$packageActions{$item}{'target'}},
$$packageActions{$item}{'owner'},
$$packageActions{$item}{'dir perms'}
);
my $targetDir = $$installation{$$packageActions{$item}{'target'}};
my $perms = $$packageActions{$item}{'file perms'};
my $owner = $$packageActions{$item}{'owner'};
$item .= '/*' if $$packageActions{$item}{'type'} eq 'directory';
if ( $TESTING ) {
print "mv $item $targetDir\n";
print "chmod $perms \"$targetDir/$item\"\n";
print "chown $owner \"$targetDir/$item\"\n";
# is this one supposed to be run as cron?
if ( $$packageActions{$item}{'cron'} && $cronLocation ) {
print "ln -s \"$targetDir/$item\" \"$cronLocation/$item\"\n";
}
} else {
`mv $item $targetDir`;
`chmod $perms "$targetDir/$item"`;
`chown $owner "$targetDir/$item"`;
# is this one supposed to be run as cron?
if ( $$packageActions{$item}{'cron'} && $cronLocation ) {
`ln -s "$targetDir/$item" "$cronLocation/$item"`;
}
}
} # foreach
}
sub readConfiguration {
my ( $configuration,$confFileName ) = @_;
}
sub ipFire {
my @BACKUP_DIRS = ('/opt/sysinfo', '/etc/sysinfo');
my @INSTALL_COMMANDS = (
'cp -av opt /',
'cp -av etc /',
'ln -s /opt/sysinfo/sysinfo /etc/fcron.daily/sysinfo.cron'
);
# now, check for backup directories not in include.user
open BACKUP, '</var/ipfire/backup/include.user';
while ( $line = <BACKUP> ) {
chomp $line;
for (my $i = 0; $i < @BACKUP_DIRS; $i++ ) {
if ( $BACKUP_DIRS[$i] eq $line ) {
$BACKUP_DIRS[$i] = '';
last;
} # if
}# for
} # while
close BACKUP;
# if any remain, append them to include.user
open BACKUP, '>>/var/ipfire/backup/include.user';
foreach my $backupDir ( @BACKUP_DIRS ) {
print BACKUP "$backupDir\n" if $backupDir;
}
close BACKUP;
# set all modules with ipfire in the name to run
opendir $moduleDir, $MODULES_DIR;
my @modules = grep { /ipfire/ } readdir $moduleDir;
closedir $moduleDir;
foreach my $module (@modules) {
`chmod 755 $MODULES_DIR/$module`;
}
}
#####################################################################
# Main Program
#####################################################################
$installMode = &checkInstall();
# if installationType or cronLocation not set, find them
$installationType = &getOperatingSystem() unless $installationType;
$cronLocation = &findCron( '/etc/cron.daily', '/etc/fcron.daily' ) unless $cronLocation;
# allow use to change installation paths
&customizeInstall( \%installation,\$cronLocation, \%packageActions );
print "Install mode is: $installMode\n";
print "Cron job will be run from: $cronLocation\n";
print "The operaitng system is: $installationType\n";
foreach my $answer ( sort keys %installation ) {
print "$answer = $installation{$answer}\n";
}
print 'Continue? [Y/n]: ';
$answer = <>;
chomp $answer;
$answer = $answer ? uc $answer : 'Y';
exit unless $answer eq 'Y';
print "Continuing the installation\n";
&doInstall( \%installation, $cronLocation, \%packageActions );
1;