Rev 174 | Blame | Last modification | View Log | Download | RSS feed
#! /usr/bin/env perl
# This file will contain information for a specific installer
# this allows the installer to be used on different programs.
# defines a basic install. Values are overridden depending on operating
# system as defined by %operatingSystems
our %install = ( 'bindir' => '/opt/camp/sysinfo-client',
'confdir' => '/etc/camp/sysinfo-client',
'application name' => 'sysinfo client',
'default group' => 'root',
'default owner' => 'root',
'default permission' => '0700',
'configuration seed file' => '<installdir>/sysinfo-client.seed.yaml',
'configuration' => {
'configurator' => '<bindir>/configure.pl',
'configuration file' => '<confdir>/sysinfo-client.yaml',
'old configuration file' => '<confdir>/sysinfo-client.conf',
'permission' => '700',
'owner' => '<default owner>',
'target' => '<confdir>'
},
'files' => {
'configure.pl' => {
'type' => 'file',
'permission' => '700',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'sysinfo-client' => {
'type' => 'file',
'permission' => '700',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'sysinfoconf.pm' => {
'type' => 'file',
'permission' => '600',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'notes' => {
'type' => 'file',
'permission' => '600',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'sysinfo-client.conf.template.yaml' => {
'type' => 'file',
'permission' => '600',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'getSendEmail.pl' => {
'type' => 'file',
'permission' => '700',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'install' => {
'type' => 'file',
'permission' => '700',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'sysinfo-client.seed.example.yaml' => {
'type' => 'file',
'permission' => '600',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'VERSION' => {
'type' => 'file',
'permission' => '600',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'SYSTEM_VERSION' => {
'type' => 'file',
'permission' => '755',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>'
},
'modules' => {
'type' => 'directory',
'permission' => '700',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>',
'action' => 'chmod 700 *'
},
'scripts' => {
'type' => 'directory',
'permission' => '700',
'owner' => '<default owner>:<default group>',
'target' => '<bindir>',
'action' => 'chmod 700 *'
},
}
);
# hash to set up os specific rules. these override values in %install when a particular operating
# system is detected.
our %operatingSystems = (
'debian' => {
'regex' => '(debian|mx|devuan)',
'bindir' => '/opt/camp/sysinfo-client',
'confdir' => '/etc/camp/sysinfo-client',
'crontab' => 'ln -fs <bindir>/sysinfo-client /etc/cron.daily/sysinfo-client',
'modules' => '((linux)|(dpkg)|(unix)|(all))',
},
'ipfire' => {
'regex' => 'ipfire',
'bindir' => '/opt/camp/sysinfo-client',
'confdir' => '/etc/camp/sysinfo-client',
'crontab' => 'ln -fs <bindir>/sysinfo-client /etc/fcron.daily/sysinfo-client.fcron',
'modules' => '((ipfire)|(unix)|(all))',
},
'freebsd' => {
'regex' => 'freebsd',
'bindir' => '/usr/local/opt/camp/sysinfo-client',
'confdir' => '/usr/local/etc/camp/sysinfo-client',
'crontab' => 'ln -fs <bindir>/sysinfo-client /etc/periodic/daily/sysinfo-client',
'modules' => '((bsd)|(unix)|(all))',
'default group' => 'wheel',
'default owner' => 'root',
},
'opnsense' => {
'fileexists' => '/conf/config.xml',
'bindir' => '/usr/local/opt/camp/sysinfo-client',
'confdir' => '/usr/local/etc/camp/sysinfo-client',
#'crontab' => 'ln -fs <bindir>/sysinfo-client /etc/periodic/daily/sysinfo-client',
'modules' => '((bsd)|(unix)|(all))',
'default group' => 'wheel',
'default owner' => 'root',
'files' => {
'actions_sysinfo.conf' => {
'type' => 'file',
'permission' => '755',
'owner' => '<default owner>:<default group>',
'target' => '/usr/local/opnsense/service/conf/actions.d',
'post action' => 'service configd restart',
'message' => 'No automatic run can be done. Please log in through the webui and enable the sysinfo cron job'
},
},
},
);
# list of libraries used by the system. We will offer to install them if
# we know how. NOTE: I have chosen to put the full installation command
# for each library. This allows us to use the package selector OR a different
# piece of code on a per-library basis, but results in something like
# apt-get -y install perl-modules
# apt-get -y install libwww-perl
# instead of
# apt-get -y install libwww-perl perl-modules
# flexibility vs efficiency in this case.
our %libraries = (
'File::Basename' => {
'debian' => {
'command' => 'apt-get -y install',
'parameter' => 'perl-modules'
}
},
'Exporter' => {
'debian' => {
'comand' => 'apt-get -y install',
'parameter' => 'perl-base'
},
},
'LWP' => {
'debian' => {
'command' => 'apt-get -y install',
'parameter' => 'libwww-perl'
},
'freebsd' => {
'command' => 'echo y | pkg install',
'parameter' => 'p5-libwww'
},
'opnsense' => {
'command' => 'cpan -i',
'parameter' => 'LWP'
}
},
'YAML::Tiny' => {
'debian' => {
'command' => 'apt-get -y install',
'parameter' => 'libyaml-tiny-perl',
},
'freebsd' => {
'command' => 'echo y | pkg install',
'parameter' => 'p5-YAML-Tiny'
},
'opnsense' => {
'command' => 'cpan -i',
'parameter' => 'YAML::Tiny'
},
'ipfire' => {
'command' => 'cpan -i',
'parameter' => 'YAML::Tiny'
}
},
'Sys::Syslog' => {
'debian' => {
'command' => 'apt-get -y install',
'parameter' => 'libsys-syslog-perl',
},
'freebsd' => {
'command' => 'echo y | pkg install',
'parameter' => 'p5-Unix-Syslog',
},
'opnsense' => {
'command' => 'cpan -i',
'parameter' => 'Unix::Syslog'
}
},
'JSON' => {
'debian' => {
'command' => 'apt-get -y install',
'parameter' => 'libjson-perl'
},
'freebsd' => {
'command' => 'echo y | pkg install',
'parameter' => 'p5-JSON'
},
'opnsense' => {
'command' => 'cpan -i',
'parameter' => 'JSON'
},
}
);
our %binaries = (
'dmidecode' => {
'debian' => {
'command' => 'apt-get -y install',
'parameter' => 'dmidecode'
},
'freebsd' => {
'command' => 'echo y | pkg install',
'parameter' => 'dmidecode'
},
'opnsense' => {
'command' => 'echo y | pkg install',
'parameter' => 'dmidecode'
}
}
);
# if subroutine &postInstall exists, it is called with a reference to the %install hash
# postInstall may return, or may call some other script. it is the last thing called by
# the installer
sub postInstall {
my $install = shift;
# We need to open sysinfoconf so we can build the configuration file
# using eval, since the installer is responsible for loading YAML::Tiny, so we may not
# have it defined when we first start up.
eval( 'use sysinfoconf qw/&writeConfig &makeConfig &showConf/;' );
&logIt( 'Entering postInstall to build configuration' );
# seed configuration, if needed
if ( $$install{'build config'} ) {
my $config;
my @fileList;
# the order is important here as, if multiple files exist, latter ones can
# overwrite values in the previous. We do a push so the first value pushed
# is processed last, ie has higher priority.
push @fileList, $install->{'configuration'}->{'old configuration file'};
push @fileList, $install->{'configuration'}->{'configuration file'};
my $seedFile = $install->{'configuration'}->{'configuration seed file'};
if ( -e $install->{'configuration seed file'} ) {
push @fileList, $install->{'configuration seed file'};
} # if preload seed file
&logIt( "Order of configuration files is\n\t" . join( "\n\t", @fileList ) . "\n" );
$config = &makeConfig( @fileList );
# if ScriptDirs and moduleDirs not populated, do so from our configuration
if ( ! $$config{'scriptDirs'} || ! scalar @{ $$config{'scriptDirs'} } ) {
$config->{'scriptDirs'} = [ $install->{'files'}->{'scripts'}->{'target'} ];
}
if ( ! $$config{'moduleDirs'} || ! @{ $$config{'moduleDirs'} } ) {
$config->{'moduleDirs'} = [ $install->{'files'}->{'modules'}->{'target'} ];
}
# We should have a nice combined configuration, so we'll write it to a temporary file
my $filename = &writeConfig( '', &showConf( $config ) );
my $confFileName = $install{'configuration'}{'configuration file'};
# configure.pl is already designed to combine our temp file with our current config file and write it ou
# so we'll just use that instead of reinventing the wheel
exec( "$install{bindir}/configure.pl -f $filename -o $confFileName" );
} # if we are building/merging configuration
}